Settings; Time; Date - Uline H-2812 Mode D'emploi

SETTINGS

TIME

Set the Time Zone before setting the Time
(See Set Time Zone on page 6). Changing
the Time Zone will change the Time.
Example: Change the time from 9:08 AM to 10:09 AM.
1. Press SELECT until the
2. "Hour" flashes. (See Figure 8)
Figure 8
Second
TIME
AM
SELECT
CHANGE HOUR
1. Press CHANGE until the Hour is "10."
2. Press SET.
3. The flashing changes from "Hour" to "Minute."
(See Figure 9)
Figure 9
*)
CHANGE MINUTE
1. Press CHANGE until the Minute is "09."
2. Press SET.
3. The "Second" starts to run from "00."
(See Figure 10)
Figure 10
*)
PAGE 7 OF 57
is under the "TIME" mark.
p
Minute
Hour
CHANGE SET
OPERATION

DATE

Example: Change the date from September 20, 2007 to
October 21, 2008.
1. Press SELECT until the
2. "Year" flashes. (See Figure 11)
Figure 11
Year
CHANGE YEAR
1. Press CHANGE until the year is "08."
2. Press SET.
3. The flashing changes from "Year" to "Month."
(See Figure 12)
Figure 12
CHANGE MONTH
1. Press CHANGE until the Month is "10."
2. Press SET.
3. The flashing changes from "Month" to "Date."
(See Figure 13)
Figure 13
is under the "DATE" mark.
p
Date
Month
DATE
SELECT CHANGE SET
DATE
SELECT CHANGE SET
0721 IH-2812