Uline H-2812 Mode D'emploi page 13

DAYLIGHT SAVINGS TIME CONTINUED
MANUALLY SETTING DST
Example:
Start Date – Sunday, March 9, 2008
End Date – Sunday, November 2, 2008
In this example, the unit remembers the Start Date as
the second Sunday in March and the End Date as
the first Sunday in November. Once the unit is set, it
automatically updates the settings every year thereafter.
No further manual setting is necessary.
1. Press SELECT until the q is above the "DST" mark.
(See Figure 36)
Figure 36
2. Press CHANGE until the option is "3" (Manual.)
3. Press SET.
4. The flashing digit indicates "Year." (See Figure 37)
Figure 37
Year
MO
SELECT
START DATE
CHANGE THE YEAR
1. In this example, the "Year" is not being changed.
Refer to DST on page 12.
2. Press SET. (See Figure 38)
Figure 38
SELECT
PAGE 13 OF 57
OPERATION CONTINUED
Date
Month
TU WE TH FR SA SU
DST
START
CHANGE SET
DST
START
CHANGE SET
3. The flashing changes from "Year" to "Month."
(See Figure 39)
Figure 39
SELECT
CHANGE THE MONTH
1. In this example, press CHANGE until the month is "3"
(March). Refer to DST on page 12.
2. Press SET . (See Figure 40)
Figure 40
SELECT
3. The flashing changes from "Month" to "Date."
(See Figure 41)
Figure 41
SELECT
CHANGE THE DATE
1. In this example, press CHANGE until the date "09."
Refer to DST on page 12.
2. Press SET.
3. The "Starting Date" of the display changes the
display from flashing to steady and the
displayed under "SU." (See Figure 42)
Figure 42
SELECT
DST
START
CHANGE SET
DST
START
CHANGE SET
DST
START
CHANGE SET
mark is
p
SU
DST
START
CHANGE SET
0721 IH-2812