Enter Password; Cancel The Password; Reset Factory Default Settings - Uline H-2812 Mode D'emploi

SET PASSWORD CONTINUED
CHANGE THE FIRST TWO DIGITS
1. In this example, press CHANGE until the first two
digits are "12."
2. Press SET.
3. The flashing changes to the last two digits.
(See Figure 48)
Figure 48
CHANGE THE LAST TWO DIGITS
1. In this example, press CHANGE until the last two
digits are "34."
2. Press SET. (See Figure 49)
Figure 49

ENTER PASSWORD

Once the password is set, you must enter
the current password before changing any
settings.
1. Press SELECT twice.
2. The numbers "9999" are displayed and the first two
digits flash. (See Figure 50)
Figure 50
PAGE 15 OF 57
OPERATION CONTINUED
SET THE FIRST TWO DIGITS
1.
2. Press SET.
3. The flashing changes to the last two digits.
Figure 51
SET THE LAST TWO DIGITS
1.
2. Press SET twice.
Figure 52

CANCEL THE PASSWORD

The code "0000" must be entered to cancel password
activation.

RESET FACTORY DEFAULT SETTINGS

Press the reset switch with a pointed object to return all
settings to the factory default settings. Refer to Factory
Default Settings. (See Figure 54)
Figure 53
In this example, press CHANGE until the first two
digits are "12."
(See Figure 51)
In this example, press CHANGE until the last two
digits are "34." (See Figure 52)
All custom settings will be deleted and will
revert to the factory default settings when
the reset button is pressed. (See Figure 53)
Reset Button
0721 IH-2812