Wall Mounting - Uline H-2812 Mode D'emploi

FACTORY DEFAULT SETTINGS
FEATURE
TIme
Date
12/24 Hour Format
Print Order
Year Digit
Hour/Minute
Leading Zero
Pre-Programmed Comments
Language
Print Length
Print Method
Daylight Savings Time
Time Zone
Password

WALL MOUNTING

The ES700 should be mounted on 1/2" drywall
using two ST 4 x 20 screws and fasteners.
1. Install the supplied wall-mount screws by using the
template. (See Figure 54)
Be sure to keep about 1/4" (6mm) of the screw
head away from the wall. The recommended
height from floor to bottom of unit is 45".
(See Figure 54)
2. Open the unit. Refer to "Open Unit" on page 5.
3. Hang the unit on the wall and install wall mount
brackets. (See Figure 55)
4. Close the unit. Refer to "Close Unit" on page 5.
PAGE 16 OF 57
OPERATION CONTINUED
FACTORY DEFAULT SETTINGS
Default = 8:00 AM
Default = 01/01/2008
Default = 1 (12 hours format, AM/PM)
Default = 1 (M.H.D. Min)
Default = 1 (2 Digits)
Hour Default = 1 (12 hours)
Minute Default = 1 ( 60 minutes format)
Leading Zero Default = 1 (zero disabled)
Default = 1 (RCVD)
Default = 1 (English)
Print Length Default = 4
Print Direction Default = 1 (right-hand margin form)
Print Activation Default = 1 (automatic)
Default = 1 (automatic)
-05, Eastern Standard Time
Default = 0000
Figure 54
Figure 55
Wall
0721 IH-2812