Uline H-2812 Mode D'emploi page 12

PRINT METHOD CONTINUED
CHANGE PRINT DIRECTION
1. In this example, press CHANGE until option is "2"
(Left-Hand Margin Form). Refer to Print Direction
Options below.
2. Press SET.
PRINT DIRECTION OPTIONS
OPTION
1
2
3. The flashing digit changes from "Print Direction" to
"Print Activation." (See Figure 33)
Figure 33
CHANGE PRINT ACTIVATION
1. In this example, press CHANGE until the option is "3"
(Manual). Refer to Print Activation Options below.
2. Press SET. (See Figure 34)
Figure 34
PRINT ACTIVATION OPTIONS
OPTION
1
Automatic – Allows you to print by inserting a card
or piece of paper.
2
Semi-Automatic – Allows you to print by pressing
the push bar only when a card or piece of paper
is inserted (prints only if the card or form reaches
the sensor). (See Figure 35)
3
Manual – Allows you to print by pressing the push
bar (even if the card or paper does not reach the
sensor). (See Figure 35)
4 Combination – Allows you to print by pressing the
push bar or inserting a card or piece of paper.
(See Figure 35)
PAGE 12 OF 57
OPERATION CONTINUED
PRINT DIRECTION OPTIONS
Right-Hand Margin Form
Left-Hand Margin Form
PRINT METHOD OPTIONS
Figure 35
Push Bar
DAYLIGHT SAVINGS TIME (DST)
DST begins on the second Sunday in March and ends
on the first Sunday in November. Refer to DST below.
• At 2:00 AM on the first day of DST, the clock
automatically gains one hour to show 3:00 AM.
• At 2:00 AM on the last day of DST, the clock
automatically loses one hour to show 1:00 AM.
Not all places in the US observe DST.
DST
DST BEGINS 2 AM
YEAR (2ND SUNDAY
IN MARCH)
2016
3/13
2017
3/12
2018
3/11
2019
3/10
2020
3/8
2021
3/14
2022
3/13
DST Mode may be set to one of the following
options:
OPTION
1
Automatic – Automatically sets from the atomic signal.
2 Off – DST is off.
3 Manual – The customer manually sets the DST feature
(refer to "Manually Setting DST" on page 13).
DST ENDS 2 AM
(1ST SUNDAY IN NOVEM-
BER)
11/6
11/5
11/4
11/3
11/1
11/7
11/6
DESCRIPTION
0721 IH-2812