Publicité
Les langues disponibles
Les langues disponibles
GB
Service intervals
Carefully perform the maintenance tasks listed in the following table on a regular basis.
Regular servicing of your unit will extend the life of your equipment. Additionally, you
will achieve optimum cutting performance and prevent accidents.
Service intervals table
Machine part
Complete machine
Accessible screws
and nuts
Chain sprocket
Saw chain
Blade bar
Transport
•
When moving to another location,
ensure that the device is switched off
and that your finger is not touching the
on/off switch.
•
Carry the device with the device at-
tachment facing backwards on the
telescopic arm.
•
Place the protective covers (17/20)
onto the device when transporting or
storing it.
138
Action
Check condition, replace da-
maged parts as needed
Tighten
Check, replace as needed
Check, apply oil, reground or
replace
Check, rotate, clean, apply oil
Before
each use
Storage
•
Perform cleaning and maintenance
work before storage.
•
Place the protective covers (17/20) on.
•
Always empty the oil tank before
pauses in operation lasting several
weeks because the bio chain oil can
become resinous and block the oil out-
let channel. Dispose of used oil in an
environmentally-responsible way (see
„Disposal/Environmental Protection").
•
Store the device in a dry, frost-free,
and dust-protected place and out of
reach of children.
•
Store the appliance in a horizontal po-
sition or secured against toppling over.
Place the cutting tool into the storage
position.
After 10 hrs of
use
Publicité
