Parts And Controls; To Use - Beurer HC 35 Mode D'emploi

3. Parts and Controls

2
1

4. To Use

1. Wash your hair as usual and then towel dry. Since hairspray is flammable, do not use hairspray while using
the hair dryer.
2. Stand on a dry, non-conductive surface and make sure your hands are dry.
3. Press the ON/OFF button to activate. The hair dryer will start on the medium warm air setting; two red LEDs
illuminate on the LED Indicator.
4. Use the warm air button or cold air button to set your preferred level. The illuminated LED Indicator shows
the current set level. See below for settings.
One red LED = Gentle airflow, warm air
Two red LEDs = Powerful airflow, very warm air
Three red LEDs = Very powerful airflow, hot air
5
6
7
10
11
3
1. Removable Narrow Concentrator Nozzle
2. Air Outlet
3. Removable Inlet Guard
4. Power Button
4
5. Cold Air Button (Blue)
6. Warm Air Button (Red)
7. LED Indicator
8
8. Handle
9. Hanging Loop
10. Power Cord Strain Protector
11. Power Cord
9
One blue LED = Gentle airflow, cold air
Two blue LEDs = Powerful airflow, cold air
Three blue LEDs = Very powerful airflow, cold air
7