Publicité
Les langues disponibles
Les langues disponibles
◆Indoor unit installation
■
Lift the indoor unit to the lifting bolts with pulleys or other
equipment. Install the indoor unit horizontally with the
horizontal instrument. If it is not installed horizontally,
water leakage may occur.
Lifting rack
■
The installation steps of embedded style is basically the same with the hanging style,
but you should make holes on the ceiling before installation, the hole size is 1 170 6 10.
Take away the left and right panels of the indoor unit, and then embed half of the unit
body into the ceiling, only show up the back panel and top panel.
■
For the floor installation style, install the indoor unit horizontally with the
horizontal instrument, the unit body keeps vertical to the floor.
4.Installation guide
Side panel
13
Screw nut
Gasket
Lifting bolts
Lifting parts
Lifting bolts
Lifting rack
Refrigerant piping gas side interface
Refrigerant piping liquid side interface
Outfall
Shackle
Bolt
Gasket
Publicité
