Publicité
Les langues disponibles
Les langues disponibles
VC-8900-EN 4/16/02 3:39 PM Page 8
REPLACING THE DUST BAG
1) To open the dust cover of the dust bag com-
partment, press the clamper upwards(the clam-
per is located at the front of the dust cover).
3) After removing the used dust bag, insert the
cardboard bag collar of the new dust bag into
its original position.
FOR CLOTH FILTER BAG
After using,if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.
DUST-FULL INDICATOR
If the "Dust-Full" indicator switch changes to "RED" while you are cleaning, the dust bag is
full and must be replaced.
NOTE :
If the "Dust-Full" indicator continues to display "RED" even after changing the dust
bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.
2) Remove the dust bag from the cleaner
4) Press the dust cover down gently until the
clamper relocks.
NOTE :
Used dust bags can be sealed by removing
the film from the paper and sticking over the
suction opening.
EN-7
Publicité
