Burkert 8177 Mise En Service page 31

6 Set up with the indicating and adjustment module
Optional settings
30
Function
Displayed value
Current output - characteristics
Current output - max. current
Current output - min. current
Current output - failure
Unit of measurement
The values of the following menu items are not reset to the reset
values (see chart) with "Reset":
Function
Lighting
Language
HART mode
Factory setting
Like basic adjustment, furthermore special parameters are reset to
default values. 3)
Pointer
The min. and max. distance and temperature values are reset to the
actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
3)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
LEVEL TRANSMITTER 8177 • 4 ... 20 mA/HART
Reset value
Distance
4 ... 20 mA
20 mA
4 mA
< 3.6 mA
m(d)
Reset value
no reset
no reset
no reset