Gumotex FRAMURA Manuel D'utilisateur page 6

FRAMURA boat rudder
GB
User's Guide
Dear customer,
this manual is intended to familiarize you with the
installation and use of the rudder, which can be
purchased as an accessory for the inflatable boat.
It contains a detailed description of the whole rud-
der system and information about its operation and
maintenance Please read this User's Guide care-
fully before using the rudder. If you have any trouble
installing or using the rudder, contact your dealer.
Please keep this manual in a safe place and give it to
the new owner if you sell the boat with the rudder.
1. TECHNICAL DESCRIPTION
1 Rudder
2 Threaded lug with nut
3 Lifting cable
4 Snap hook
5 Pedal
6 Control cable
7 Allen M6 screw
8 Metal pedal bracket
9 Fixing system for the rudder
10 Pin with circlip
11 Brake
2. INSTRUCTIONS FOR INSTALLING
THE RUDDER
Assembling the rudder, Fig. No. 1
After removing the rudder (1) from the box,
insert the supplied threaded lugs (2) in the
outer holes and secure with nut M5 (you can
use the hole in the opposite piece of the rud-
der holder). Slide the snap hooks (4) in the
threaded lugs (2) and at the end of the lifting
cable (3).
Installing the pedal bracket in the kayak,
Fig. No. 2
Instructions for assembling and installing the
metal pedal bracket are included separately.
6
Index
1. Technical description
2. Instructions for installing the rudder
3. Operating the rudder
4. Disassembly of the rudder
5. Maintenance and storage
6. Warranty conditions
7. Disposal of the product
8. Disposal of the packaging
1
1
2
10
2
6 5
7
Version 1/2022
3 4
6
9
11 8