Menu - Luvion easy Manual D'instructions

menu

open the menu of the luvion Easy to change the
device settings.
> Press the oK / Menu button on the parent unit to
open the menu.
> use the left and right buttons to select a submenu.
> Press the oK button to confirm a selection, marked
with a frame, and open a submenu.
1. Pairing use this submenu to pair the baby unit
(camera) with the parent unit (monitor).
2. settings use this submenu to set the date and
time, temperature settings, camera switching
mode and the display backlight.
3. VoX use this submenu to (de)activate the VoX
mode and to set the VoX mode sensitivity.
4. languages use this submenu to set the language.
5. system Information use this submenu to display
the installed software and product information.
> camera
menu
the parent unit (monitor) and the baby unit (camera)
are paired at the factory. You don't need to repeat this
procedure unless they loose connection.
> Press the Menu / ok button to enter the main
menu.
> Select the camera icon and press ok to confirm the
selection and open the camera menu.
> Select camera 1 or 2
> Press ok again to start the Pairing procedure.
> A message appears asking if you want to re-
register the camera. select "YES" and press the ok
button to confirm.
> You have 10 seconds to briefly press the pairing
button on the camera.
> If pairing is successful the message "register
Successful!" will be displayed.
LUVION
Premium Baby products
1 2
VoX
i
4 5
9
3