Luvion easy Manual D'instructions page 7

: Before permanently installing the baby unit (camera), make sure that the wireless connection
note
between the baby unit and parent unit is sufficient. Verify this when both the parent unit and baby unit are
placed in the positions from which you would like to use them.
: Avoid walls or other obstructions between the baby and parent unit as much as possible. For a good
note
sound sensitivity and image quality it is recommended to place the baby unit between 1,5 and 3meters
away from the baby.
: The range will be affected by anything in between monitor and camera, both physical or digital.
note
Especially metal objects, like kitchen appliences, steel doors or reinforced concrete can significantly limit
the signal. Walls, ceilings windows and signals emited by radio or electrical equipment (such as TV's,
computers, cordless or mobile phones), will also limit the range.
3. connect the power adapter to the baby unit and a power socket.
4. the power lEd will now light up.
the parent unit will display the video of the baby unit, when both are switched on and within range of each
other. the message "connecting" will be displayed on the screen of the parent unit when the baby unit is
outside the range of the parent unit or when the baby unit is not switched on or recognized.
LUVION
Premium Baby products
7