Tripp-Lite BP Serie Manuel De L'utilisateur page 9

Mounting (Rack)
BP24V15RT2U 2-Post Mounting
To install the external battery pack in a 2-post rack, remove the mounting hole covers
from the top and bottom sides of the pack
the UPS using the included hardware
pack and attach it to a standard rack with user-supplied hardware
1
3
Important: Illustrations show the most common installation
configurations; your model may vary. Use only the pre-drilled screw holes
to attach mounting brackets to the sides of the battery pack. When
installing battery packs into the rack, ensure the weight of the unit is
evenly distributed.
18-09-336 93-36FF.indb 9
1 . Attach the mounting ears to each side of
2 . With the help of an assistant, lift the battery
2
9
3 .
12/18/2018 8:27:03 AM