Tripp-Lite BP Serie Manuel De L'utilisateur page 10

Mounting (Tower)
Select external battery pack models support tower
mounting. For increased stability, Tripp Lite
recommends the use of the 2-9USTAND (sold
separately). Ensure the Battery Orientation Warning
label is not facing upward when installing the
battery pack in tower orientation. Follow the
instructions included with the 2-9USTAND to
complete the installation.
BP24V15RT2U Tower Mounting
The BP24V15RT2U will stand in a tower position without the aid of the included
hardware. For increased stability, Tripp Lite recommends removing the screw covers
from each bottom side
the user must determine the fitness of hardware and procedures before installation.
1
NOTICE: If Battery Orientation Warning labels are affixed to both sides of
the battery pack, it can only support rack-mount installation.
18-09-336 93-36FF.indb 10
1 and attaching the included hardware
2
10
WARNING
DO NOT INSTALL PRODUCT
WITH THIS LABEL
FACING UP
2 . In either position,
12/18/2018 8:27:04 AM