Camera Angle; Picture Control; Stereo Sound Mode; Virtual Surround - Denon DVD-557 Mode D'emploi

DISC PLAYBACK

Camera Angle

Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle when the (
1
Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
desired angle.
1 / 8
2 / 8
8 / 8
NOTE:
• If the "ANGLE ICON" setting is "OFF" in the Display
menu, the ( ) will not appear (refer to page 25).

Picture Control

Picture Control adjusts Brightness, Contrast, Color, Gamma
Correction and Sharpness of the specific display.
1
During playback, press the
MODE button.
2 Press the Cursor buttons (K
or L) to switch among items.
3
Press the ENTER button or the Cursor buttons
(s or B) to adjust the selected item to a desired
level.
• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be
selected.
4
To return to normal playback, press the RETURN
button.
NOTES:
• The default settings for all items in Picture Control are
"0".
• The setting display will disappear in 10 seconds of no
use.
• This function cannot be used during Dialog Speed
(refer to page 21).
• If you return all items to the default settings, please
execute initialize.
DVD
) mark appears on the screen.
Angle 1
Angle 2
Angle 8
DVD
BRIGHTNESS s +1B

Stereo Sound Mode

1
Press the AUDIO button repeatedly during play-
back to select your desired sound mode.
STEREO - both right and left channels are active (stereo)
L-ch - only left channel is active
R-ch - only right channel is active
STEREO
L-ch
R-ch
NOTE:
•
The STEREO can only be output when playing back DTS CD.

Virtual Surround

You can enjoy surround-sound effect with two speakers.
1
During playback, press the
MODE button repeatedly until
the Virtual Surround setting
appears.
2
Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
3
Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or lower the volume if the
sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than "STEREO" (for Audio CD
playback only).
• This function cannot be used during Dialog Speed
(refer to page 21).

Black Level Setting

Adjust the Black Level Setting to make the black parts of the
picture as bright as you prefer.
1 During playback, press the
MODE button repeatedly until
Black Level setting appears.
2 Press the ENTER button to switch ON/OFF.
ON (Default) : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.
3
Press the RETURN button to exit.
NOTE:
• This function cannot be used during Dialog Speed
(refer to page 21).
– 22 –
Both right and left channels
are active (stereo).
Only the left channel
is active.
Only the right channel
is active.
DVD CD MP3
OFF
ON
CD
WMA
DVD
EN