Changing The On-Screen Display - Denon DVD-557 Mode D'emploi

DISC PLAYBACK
• Progressive JPEGs (JPEG files saved in the progres-
sive format) will not be played back on this DVD player.
• High resolution JPEG files take longer to be displayed.
• The size change mode may have no effect on some
files (e.g. files with a small picture size).
NOTES on WMA:
• The DVD player can reproduce data recorded as ISO
9660 level 2 with 31 characters file name included
punctuation marks. The name of file can be displayed
up to 25 characters.
• Maximum of 8 subfolders can be recognized.
• It can also be displayed tag information of WMA at
least 64 characters.
• A file with an extension of Joliet as Unicode format in
up to 64 characters can be recognized.
• This unit cannot play back copyright protected WMA files.

Changing the On-Screen Display

You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1 Press the DISPLAY button
during playback.
• Current chapter number/total
chapters, elapsed time and
remaining time of the current chapter, and current play-
back status will be displayed.
2 Press the DISPLAY button again.
• Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
3 Press the DISPLAY button
for the third time.
• The bit rate (the amount of
video data currently being
read) and current playback status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
( C: Chapter repeat/
repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is played back. L1: Layer 1 is played back.)
4
Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
this page.)
5 Press the DISPLAY button again to exit.
1
Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current play-
back status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
( T: Track repeat/
repeat)
Press the DISPLAY button again.
2
• Current track number/total tracks, elapsed time and
remaining time of the entire disc, and current playback
status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
( T: Track repeat/
repeat)
• When you are playing back a disc in program or random
mode, PROGRAM (or RANDOM) will be displayed.
Press the DISPLAY button again to exit.
3
9/49 0:00:00 -0:03:30
IIIIIII
T L1
T: Title repeat/A B: A-B
A: All tracks repeat/A B: A-B
A: All tracks repeat/A B: A-B
1 Press the DISPLAY button
during playback.
• Current file name will be dis-
played.
2 Press the DISPLAY button.
• Current track number/total
tracks and elapsed time (MP3)
will be displayed.
• Current repeat setting appears only when the Repeat
setting is active.
( T: Track repeat/
repeat).
• When you are playing back a disc with MP3 or JPEG
files in program or random mode,
RANDOM) will be displayed.
3
Press the DISPLAY button again.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
DVD
button. Then press the DISPLAY button to exit.
4
Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI output
mode. (Refer to NOTE FOR HDMI DISPLAY on this page.)
5 Press the DISPLAY button again to exit.
1 Press the DISPLAY button
during playback.
• Current file name will be displayed.
2 Press the DISPLAY button again.
• Title name based on tag infor-
mation of currently played-
back file will be displayed.
3 Press the DISPLAY button
for the third time.
• Artist name based on tag infor-
mation of currently played-
back file will be displayed.
4
Press the DISPLAY button again.
urrent track number/total
• C
tracks and elapsed time
will be displayed.
• Current repeat setting appears only when the Repeat
setting is active.
( T: Track repeat/
(folder) repeat).
• When you are playing back a disc in program or random
CD
mode,
5
Press the DISPLAY button again.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button to exit.
6
Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI output
mode. (Refer to NOTE FOR HDMI DISPLAY on this page.)
7 Press the DISPLAY button again to exit.
NOTE:
• If the file does not contain tag information, NOT AVAIL-
ABLE will be displayed.
NOTE FOR HDMI DISPLAY:
• The displayed HDMI status
are as follows:
1. Information for image out-
put/Resolution of image
2. Sound output format
3. Maximum number of audio channels that can be
accepted by the connected equipment
– 20 –
MP3
<Example: MP3>
TR
A: All (disc) repeat/
TITLE NAME
ARTIST NAME
TR
A: All (disc) repeat/
PROGRAM (or RANDOM) will be displayed.
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
JPEG
TRACK 01
1/36 0:01:15
T
G: Group
PROGRAM (or
WMA
TRACK 01
1/36 0:01:15 T
G: Group
EN