Skil PWRCORE 12 Guide D'utilisation page 18

tightening the screw less difficult. When screws are positioned close to an edge of the
material, a pilot hole will also help to prevent splitting of the wood.
e. Use a countersinking bit (sold separately) to accommodate the screw head so that it does
not protrude from the surface.
f. Keep sufficient pressure on the drill to prevent the bit from turning out of the screw head.
The screw head can easily become damaged, making it difficult to drive or remove the
screw.
g. To stop the drill/driver, release the trigger switch and allow the tool to come to a complete
stop.
Automatic Spindle Lock
The automatic spindle lock allows you to use it as a manual screwdriver. You can give an extra
twist to firmly tighten a screw, loosen a very tight screw, or continue working when the battery
charge is depleted. For manual screwdriver purposes, the chuck is automatically locked when
the tool is off.
18