Publicité
Les langues disponibles
Les langues disponibles
Malfunction
The automatic warm-up
function
cannot
switched on.
The
automatic
switch-off function cannot
be set.
The
automatic
switch-off function cannot
be switched off.
The timer minute minder
cannot be set.
The timer minute minder
cannot be switched off.
The appliance does not
respond to control panel
entries.
Cause
The cooking zone still
be
features residual heat.
The heat setting is set via
the „heat setting selection"
sensor field.
There was a power cut.
timer
The cooking zone is not
selected.
The control panel is locked.
timer
The cooking zone is not
selected.
The control panel is locked. Unlock the control panel.
The automatic switch-off
function of one cooking
zone is set.
The control panel is locked. Unlock the control panel.
The control panel is locked. Unlock the control panel.
The appliance is switched
off.
The
electronics
defective.
The overheat protection
feature has switched off all
cooking
inhibited their functions.
Allow the cooking zone to cool
down.
1. Switch off the cooking
2. Set the heat setting via the
The existing residual heat is no
longer displayed.
Select the cooking zone.
Unlock the control panel.
Select the cooking zone.
Switch off the automatic
switch-off function.
Switch on the appliance.
are
1. Switch off the appliance.
2. Disconnect the appliance
3. Call the customer care
Allow the cooking zones to
cool down.
zones
and
33
Remedy
zone.
"heat setting selection"
sensor field.
from the mains power
supply (remove fuse).
service.
Publicité
