Publicité
Les langues disponibles
Les langues disponibles
Malfunction
The cooking zones cannot
be switched on.
The cooking zones cannot
be switched off.
The residual heat display
does not display.
The residual heat display
does not indicate anything.
Cause
The child safety feature is
switched on.
Since switching on the
appliance more than 10
seconds have elapsed.
Since selecting the cooking
zone more than 10 seconds
have elapsed.
Since selecting the cooking
zone more than 10 seconds
have elapsed.
The power has failed for a
short time.
The
electronics
defective.
The cooking zone was only
switched on for a short
time.
The
electronics
defective.
There was a power cut.
32
Remedy
Switch off the child safety
feature (see „child safety
feature" section).
Switch the appliance back on.
Re-select the cooking zone.
Re-select the cooking zone.
1. Wait for the power cut to
end.
Switching on the appliance.
The existing residual heat is no
longer displayed.
are
1. Switch off the appliance.
2. Disconnect the appliance
from the mains power
supply (remove fuse).
3. Call the Service Force
Centre.
There is no malfunction if the
cooking zone is cold.
are
1. Switch off the appliance.
2. Disconnect the appliance
from the mains power
supply (remove fuse).
3. Call the Service Force
Centre.
The existing residual heat is no
longer displayed.
Publicité
