Publicité
Les langues disponibles
Les langues disponibles
-
.
Keep warm function
Automatic warm-up
Residual heat display
Child safety feature
Your appliance functions
Automatic warm-up function: All cooking zones may be regulated in fourteen stages and
feature an automatic warm-up function.
Using the automatic warm-up function
full power and then switches back automatically to the heat setting selected.
The duration of the warm-up phase depends on the heat setting selected.
The power management system switches back the automatic warm-up function
automatically to the heat setting selected.
Direct control of each cooking zone: Each cooking zone is directly controlled via the
appropriate touch control sensor fields.
Error display:
for errors lights up in the display when a malfunction occurs on the
appliance (see section „Rectifying faults").
Child safety feature:
unintentional switching on of the appliance.
Residual heat display:
enough for there to be a risk of burning.
When the ceramic glass hob is switched off the residual heat display extinguishes only once
the cooking zone has cooled down to the point that there is no longer a risk of burning.
Keep warm function: Meals may be kept hot using the keep warm function (heat setting
).
STOP&GO: All set cooking zones are switched to the keep warm function
set heat setting (not in the automatic warm-up function).
Display
Heat setting
Decimal point
function
Error display
With this function the hob can be locked to prevent any
for residual heat will illuminate if the cooking zone becomes hot
Description
The appliance is switched on.
Set cooking zone heat setting.
Set cooking zone intermediate heat setting.
Keep warm function is set.
Automatic warm-up function is activated.
A malfunction has occurred.
The cooking zone is switched off but still hot.
Child safety feature is activated.
Safety cut-out is activated.
the cooking zone operates for a specific time at
10
or back to the
Publicité
