Panasonic MJ-L501 Mode D'emploi page 13

To a s s e m b le
2
Set the juicing bowl on the motor housing.
Align the " A " mark on the motor housing and the "V " on
the juicing bowl.
3
Attach the rotating brush and juice cone,
then set it on the motor housing.
Align the " A " mark on the motor housing and
the "▼ " mark on the juice attachment.
4
Mount the squeezing screw.
© Insert the squeezing screw into the centre.
@ Rotate the squeezing screw and push it into the
hole until it stops.
• The lid cannot be closed if the squeezing screw
is not pushed down sufficiently.
• Be careful not to get your finger clamped in the
gap between the squeezing screw and the juice
cone.
Frozen cone
GB13