Fein MULTIMASTER FMM250 Mode D'emploi page 14

3 41 01 091 21 0.book Seite 14 Montag, 29. Juni 2009 8:32 08
en
14
Working instructions.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Do not use accessories which are not specifically designed and recommended by the power tool
manufacturer. Safe operation is not ensured merely because an accessory fits your power tool.
For each job, use only the FEIN application tool released and intended for the respective
application.
Connecting the dust extraction
(Figure 2, ).
When working materials that
CAUTION
produce dust, the power tool is
to be connected to an external dust extraction
via the extraction adapter.
Switching ON and OFF (Figure 1).
First check that the power
WARNING
cable and power plug are not
damaged.
Always hold the power tool
CAUTION
firmly. Otherwise, you could
lose control over the power tool.
Setting the oscillating frequency
(Figure 1).
The oscillating frequency can be set infinitely
variable with the dial control.
Increasing the oscillating frequency:
Turn dial control in counterclockwise
direction.
Decreasing the oscillating frequency:
Turn dial control in clockwise direc-
tion.
Securing the work piece.
Secure the workpiece firmly.
CAUTION
A work piece that is gripped
tightly in a clamping device or vice, is more
secure than if held by hand.
The vacuum cleaner must be suitable for the
material being worked.
When vacuuming dry dusts that are particu-
larly hazardous to one's health or carcino-
genic, a specialty vacuum cleaner is to be
used.
Switching ON:
Push the switch towards the front (I).
Switching OFF:
Push the switch towards the back (0).
The oscillating frequency depends on the
application and the application tool. Example:
– High oscillating frequency:
Sanding, sawing, using as a rasp, polishing
stone and metal.
– Low oscillating frequency:
Polishing of varnish and veneers, removal of
grout, teak decks from boats.