Turning Off; Turning On; Standby - Marmitek BoomBoom 150 Guide Utilisateur

TURNING OFF

Depress the POWER button and the BoomBoom150/152 will go
off.

TURNING ON

Depress the POWER button. The BoomBoom150/152 will
produce a "beep" tone. The blue LED lights start blinking fast.
The BoomBoom150/152 will then automatically link to the last
device it was connected to. When connected, the blue LED
lights go blinking at a slow rate. Only 1 device can be
connected at once with the BoomBoom150/152. If your device
does not connect automatically, go to the device's Bluetooth
settings and select the BoomBoom150/152. A connection will
then be made.
Turn off the Bluetooth speaker in order to pair the device with
another Bluetooth device.

STANDBY

If the BoomBoom150/152 is in connecting mode (blue LED
blinks fast) and no connection is made within 20 seconds, the
BoomBoom150/152 will switch to pairing mode ( The red &
blue LEDs will then flash alternately). After 150 seconds, the
BoomBoom150/152 will switch to standby setting (blue LED
blinks slow).
BoomBoom150/152 5