brennenstuhl MULTI HL 3000 Mode D'emploi page 10

Operating instructions
To ensure IP54 (dust and splash-proof ), the floodlight may only be operated with the
battery cover correctly closed.
If the device is not used for a longer period of time, remove the rechargeable battery.
The floodlight can also be operated without battery cover up to 12 Ah rechargeable
batteries; in this case, the IP class will, however, be reduced to IP20 and the floodlight may
only be operated in a dry environment. To do so, open the battery cover locking (Fig. 1a).
Afterwards, remove the battery cover.
CHARGING THE RECHARGEABLE BATTERY
Only use one of the manufacturer's original charging device: Bosch, Dewalt, Festool, Flex,
Makita, Metabo (CAS), Milwaukee.
SCOPE OF DELIVERY
Floodlight, 6 multi adapters: Bosch, Festool, Flex, Makita, Metabo, Milwaukee/Dewalt,
Adapter bag.
ACCESSORIES
Suitable accessories are available on our homepage www.brennenstuhl.com.
CLEANING
Remove the rechargeable battery before cleaning.
Do not use solvents, caustic cleaning agents or similar products.
Only use a dry or slightly moistened cloth for cleaning.
MAINTENANCE
ATTENTION: The LED lamp does not contain components that require maintenance.
The light source of this lamp cannot be replaced. If the light source has reached the end of
its service life, the entire lamp has to be replaced. The lamp may not be opened.
EU DECLARATION OF CONFORMITY
UK DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
10
013122 BA_MULTI HL 3000 0533947.indd 10 013122 BA_MULTI HL 3000 0533947.indd 10
MULTI HL 3000
26.04.22 12:53 26.04.22 12:53