Hatco GLO-RAY GRSS Série Instructions Originales page 10

INSTALLATION
NOTICE
Do not modify wiring or cut thermostat capillary on control
box to increase remote mounting distance. Cutting
thermostat capillary will cause unit to overheat and may
damage unit as well as surrounding countertop.
GRSSB Built-In Installation
Model
GRSSB-2418 625 mm (24-5/8") – 632 mm (24-7/8")
GRSSB-3018 778 mm (30-5/8") – 784 mm (30-7/8")
GRSSB-3618 930 mm (36-5/8") – 937 mm (36-7/8")
GRSSB-4818 1235 mm (48-5/8") – 1241 mm (48-7/8")
GRSSB-6018 1540 mm (60-5/8") – 1546 mm (60-7/8")
GRSSB-7218 1845 mm (72-5/8") – 1851 mm (72-7/8")
Trim Mounting Ring
Countertop
GRSSB Built-In Installation
GRSSB Countertop Cutout Chart
Width
8. Once all components are secured, proceed to the
OPERaTION section.
NOTE: A 1829 mm (6') cord is supplied with this unit; any
excess cord should be routed neatly so it does not hang
down.
Apply a bead of NSF-approved
sealant between the countertop
material and trim mounting ring.
Sealant must be rated for use at
a minimum temperature of
121°C (250°F).
Depth
473 mm (18-5/8") – 479 mm (18-7/8")
473 mm (18-5/8") – 479 mm (18-7/8")
473 mm (18-5/8") – 479 mm (18-7/8")
473 mm (18-5/8") – 479 mm (18-7/8")
473 mm (18-5/8") – 479 mm (18-7/8")
473 mm (18-5/8") – 479 mm (18-7/8")
10
Form No. GRSSCEM1-0715