Publicité
Les langues disponibles
Les langues disponibles
E N G L I S H
EASY MAINTENANCE & CLEANING
•
Monthly cleaning and regular maintenance may help
extend the life of your cushion. During cleaning,
component inspection is recommended.
•
Check the cover for tears and excessive wear and
replace if ripped, torn or otherwise not fully functional.
Inspect the fluid pad for punctures or any other
abnormalities.
•
Check the foam insert to ensure foam consistency.
While checking the fluid pad if you ever feel the fluid
is firmer in one area, simply knead the fluid back to its
original consistency and/or call your supplier.
TO CLEAN INNER COVER
•
Remove the cover from the foam insert and turn inside
out.
•
Machine wash in warm water (40°), Or spray/wipe
disinfect and air dry.
•
No ironing required.
TO CLEAN OUTER COVER
•
Remove the cover from the foam insert and turn inside
out.
•
Machine wash in warm water (maximum recommended
temperature is 70° for microclimatic and stretch covers,
60°C for incontinent covers) and air dry.
•
No ironing required.
CAUTION
•
Do not dry clean covers or use industrial washers and
dryers to clean cover.
•
Do not steam autoclave.
•
Do not bleach.
•
To refit cover after washing, reinstall the cover on the
foam insert. Ensure the back of the cover matches up
to the back of the foam insert.
•
If used in an institutional setting, write the resident's
name with a permanent marker on the content label
of the covers. This will help to ensure the return of the
covers after washing.
•
Use only Jay covers on Jay cushions. The cover is an
important part of allowing the immersion into the fluid
insert which redistributes the pressure. Changing the
cover will alter this design and its efficacy.
127348
10
M A I N T E N A N C E / C L E A N I N G
CLEANING THE FOAM BASE / LEG SUPPORT WEDGES
Remove the covers and fluid pad from the foam base.
Wipe lightly with a damp cloth. Do not use soap. Do not
submerge in water. Wipe off with a clean cloth. Let it
completely air-dry before reassembly.
The leg support covers can be machine washed in warm
water (40°C) or spray/wipe disinfected and air dried. The leg
support wedges can be wiped with a damp cloth (do not use
soap and do not submerge in water) and then wiped off with
a clean cloth. Let it completely air-dry before reintroducing
them into the covers.
CAUTION
Avoid submersion of the foam base and leg supports in
water.
CLEANING THE FLUID PAD
Remove the outer cover from the cushion. Remove fluid pad
from the inner cover and wipe it with warm water and soap.
Rinse with a clean, damp cloth, then wipe dry with a clean
cloth.
CAUTION
•
Never submerge the fluid pad in any liquid.
•
Avoid harsh cleaning or rough handling as this may lead
to a degradation of the fluid insert and lead to a leakage.
Should there be evidence of wear and tear on the cover,
foam insert, fluid insert or other parts or if you notice that the
consistency has deteriorated, please contact your dealer or
Sunrise Medical for an assessment and further instructions.
LAUNDRY CARE SYMBOLS
Machine wash in warm water
(70° C)
Only non-chlorine bleach,
when needed
Drip dry
Do not iron
Do not dry clean
JAY Xtreme Active Rev.F
Publicité
