Stand-Alone Installation And Wall Mounting - Renkforce TB230WW Notice D'emploi

b) Stand-alone installation and wall mounting
You can choose to install the Soundbar on a TV shelf (option A) or to a wall (option B). The choice of
installation method depends on the current position of your TV. Place the Subwoofer on an even and level
surface and within a range of max. 6 metre to the Soundbar.
Option -
Do not cover the Soundbar and Subwoofer with tablecloths or similar objects. The product
could otherwise become very hot during use and cause fire, damage or injury.
Stand-alone installation (option A)
• Place the Soundbar on a stable and horizontal surface.
• Make sure that there are no magnetic sources such as speakers in the near proximity.
Wall mounting (option B)
When drilling installation holes or tightening screws, make sure not to damage any existing
cables or pipes (e.g. water pipes).
Caution! The installation must be carried out by a qualified expert. Improper installation can
cause hazards to you and other persons! If you do not have the relevant expert knowledge,
do not install the product yourself, but have it done by a professional.
Make sure the installation location is sufficiently stable and secure to withstand the product.
Caution! Do not over-tighten screws. Over-tightening screws can cause instability.
• Remove the screws (14) on the rear side of the Soundbar.
• Use the screws that you had just removed to attach the wall
brackets to the rear side of the Soundbar. Use a suitable
Phillips screwdriver.
A O ption - B
29