Connection Of The Speakers And The Power Supply - Renkforce DAB-RCD3038 Notice D'emploi

Electric Connection

Connection of the Speakers and the Power Supply

The car radio has an ISO system plug.
Vehicles equipped with such a system plug can be connected directly to the system if the plug assignment is the same
(please check beforehand!). If the plug assignment differs, use a vehicle-specific adapter from a specialist vendor
for connection.
Please refer to the following illustrations for the contact assignment of the car radio socket.
Please ask your car dealer for the respective assignment of your vehicle system plug.
System connector B (speaker connection)
(1) Speaker rear right (+)
(2) Speaker rear right (-)
(3) Speaker front right (+)
(4) Speaker front right (-)
(5) Speaker front left (+)
(6) Speaker front left (-)
(7) Speaker rear left (+)
(8) Speaker rear left (-)
System plug A (power supply)
(1) Not assigned
(2) Not assigned
(3) Not assigned
(4) Continuous current +12V
(5) Aerial control output
(6) Not assigned
(7) Ignition +12V
(8) Ground
53