Renkforce DAB-RCD3038 Notice D'emploi page 49

Mechanical Installation
• Remove the front control unit (step 1).
• Carefully remove the plastic frame in the front of the system, by bending it slightly to the outside and pulling it off
from the unit (step 2).
• Unlock the installation frame with the two unlocking keys (step 3).
• Remove the installation frame towards the back of the system (step 4).
• Insert the frame into the respective cut-out in the vehicle (step 5).
• Bend down some clips in the installation frame until the frame is securely fastened in the recess (step 6).
49