Mounting The Dab Aerial - Renkforce DAB-RCD3038 Notice D'emploi

Mechanical Installation

Mounting the DAB Aerial

The car radio has a DAB disc aerial included. Install it as follows:
For adhesive installation, a minimum temperature of approx. 15°C is required. Clean the
adhesive areas with a suitable cleaner before installation (e.g. cleaning alcohol).
Do not glue the aerials in the area of metal-vaporised windshield parts or close to heating wires.
Do not attach the aerial in the field of view of the driver. It must not impair the driver's view.
When selecting the mounting site, observe the length of the aerial cable. It must reach to the
installation site of the car radio.
The DAB aerial and connection cable never must be installed or placed in the trigger area of an
airbag.
• Attach the included double-sided adhesive tape to the side of the aerial casing that has an indentation.
• Align the aerial vertically and attach it on the windshield in the area between the inner mirror and A-column of
the passenger side. Keep a distance of approx. 1.5 cm to the top roof edge and at least approx. 4 cm from the
A-column.
• Place the connection cable of the aerial to the car radio and connect it to the car radio as described in "Electrical
Connection" later in these instructions.
51