Fitting; Tg And Tgrk Roof Duct - Exhausto DTH160 Mode D'emploi

3004346_2020_06_11.fm

2. Fitting

2.1 TG and TGRK roof duct

The EXHAUSTO standard Roof Ducts TGR and
TGK are made of a galvanized plate winding, 50
mm mineral wool for insulation/sound absorption,
tissue, and, on the inside, a galvanized
perforated plate.
The roof duct has an inner cable conduit, through
which the isolation switch cabling and the cabling
can be pulled all the way through.
Installing the TGR: Mount the repair switch (not supplied by EXHAUSTO) on the bracket against the
isolation switch gasket.
TGK: Mount the repair switch (not supplied by EXHAUSTO) directly on the roof duct
against the gasket.
Duct system and The roof duct can be connected to any
extraction system EUROVENT-standard duct system.
Roof duct are supplied with a shutter (AOR).
When cleaning the ducting system, the shutter
can be dismounted without the use of tools.
54/77