Hilti C 4/36-90 Mode D'emploi page 22

Status
1 LED blinks.
3.4 Items supplied
Charger, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group | USA: www.hilti.com
4 Technical data
Weight
Output voltage
Output power
5 Operation
5.1 Switching on the C 4/36-90 and C 4/36-350 charger
C 4/36-90
C 4/36-350
▶ Plug the supply cord into the power outlet.
➥ The green LED on the charger lights.
5.2 Switching the C 4/36-DC charger on
C 4/36-DC
When charging a Hilti battery with the C 4/36-DC charger, the motor
vehicle's starter battery may discharge to such an extent that the battery
is no longer capable of fulfilling its purpose
Depending on how the motor vehicle's electrical system is configured,
the charger will either receive power immediately or only after the ignition
is switched on.
▶ Plug the supply cord into the motor vehicle's cigarette lighter socket.
➥ The green LED on the charger lights constantly when the input voltage
is correct.
18 English
Printed: 03.01.2019 | Doc-Nr: PUB / 5069440 / 000 / 12
Meaning
State of charge: < 25 %
C 4/36­90
0.6 kg
7.2 V ... 36 V
110 V 90 W
230 V 90 W
12 V •/•
24 V •/•
C 4/36­350 C 4/36­DC
1.1 kg 0.6 kg
7.2 V ... 36 V 7.2 V ... 36 V
350 W •/•
365 W •/•
•/• 60 W
•/• 60 W
2024461
*2024461*