Koala Kare KB200-SS Mode D'emploi page 3

KB200-SS
bed and metal
mounting chassis
Step 1. Inspect Contents
Remove changing station from the shipping container and check for any freight damage. If
damage is found, please call Koala Kare Products' Customer Service at 888.733.3456. Gently
and slowly peel back plastic coating to inspect the stainless surface. Verify there is no damage
to the stainless panel before installing. Remove "Installation Kit" and "Operator Kit" from box.
Please give "Operator Kit" to facility manager or operator. Box should contain two pieces: the
bed and metal mounting chassis and the wall mount liner dispenser. Identify the best location
for installing the unit.
Installation Instructions
Horizontal Surface Mounted Baby Changing Station
keyhole slot
wall mount liner dispenser
2