Publicité
Les langues disponibles
Les langues disponibles
V4.1
INSTALL THE SHIELDING GAS CYLINDER
Always secure a gas cylinder to a welding cart, wall or other fixed support to prevent the cylinder from falling over and
rupturing.
1. Remove the protective cap from the cylinder and inspect the regulator connecting threads for dust, dirt, oil and
grease. Remove any dust or dirt with a dean cloth. Do not attach the regulator if there is oil or grease present or if
the valve is damaged.
2. Open and close the cylinder valve to blow out any foreign matter inside the valve port. Never aim the open valve
cylinder port at yourself or bystanders as blown particulate matter may cause an injury.
3. Screw the regulator into the cylinder valve and tighten with a wrench.
a. A special adapter may be required between the regulator and a cylinder with male regulator connection threads.
4. Firmly push the gas hose over the barbed fittings on the back of welding unit and the regulator.
5. Secure each hose end with a hose clamp.
INSTALLATION & ADJUSTMENT
PARAMETERS
Parameters
Power Source
Rated Input Current (A)
Rated Input Power (KW)
Power Factor
Max. No-Load Voltage (V)
Start Current Adjustment Range (A)
Welding Current Adjustment Range (A)
Crater Arc Current Adjustment Range (A)
Downslope Time Adjustment Range (S)
Pre-gas Time (S)
Post-gas Time Adjustment Range (S)
Clearance Effect (%)
Efficiency, Duty Cycle (40°C, 10 mins.)
Protection Class
Insulation Class
Dimensions of Machine (LxWxH)
Weight
NOTE: The above parameters are subject to change with the improvements of the machine.
Visit www.princessauto.com for more information
SMART TIG AC/DC-200P Inverter Welding Machine
SMART TIG AC/DC 200P
Single Phase, 220V/230V/240V±10%, 50/60Hz
30.4 (TIG)
5.2 (TIG)
0.68
66
TIG
AC
HF
10 ~ 200
10 ~ 200
10 ~ 200
0 ~ 10
0.1 ~ 3
0 ~ 10
15 ~ 50
TIG
AC
25%, 180A
60%, 110A
100%, 80A
IP21S
F
17-3/4 x 9-17/32 x 16-1/2 in. (476 x 242 x 423 mm)
44.9 lb (20.37 kg)
35.6 (MMA)
6.4 (MMA)
DC
LIFT
10 ~ 200
30 ~ 200
30 ~ 200
10 ~ 200
30 ~ 200
10 ~ 200
DC
25%, 200A
60%, 90A
100%, 70A
MMA
AC
DC
--
--
10 ~ 170
10 ~ 170
10 ~ 170
10 ~ 170
MMA
AC
DC
25%, 170A
25%, 170A
60%, 110A
60%, 110A
100%, 80A
100%, 80A
8560237
Table 1
13
Publicité
