Orbegozo CP 92105 Manuel D'instructions page 10

CP 92105 CP 93105
Other specific safeguards
1. Make sure that when the fan is fitted in the chosen
position, there is no possibility of the rotating blades
coming into contact with any object. Blades should be
at least 2.30 m from floor when fan is hung.
2. If you are installing more than one ceiling fan make sure
that you do not mix fan blade sets, even though they
are from the same ceiling fan model.
3. Before beginning, disconnect power by removing fuse
or turning off circuit breaker.
4. Once fan installation is completed make sure that all
connections are secure to prevent fan from falling.
5. Fan must be turned off and stopped before reversing
fan direction.
6. Check that the means of fitting the fan to the ceiling is
capable of supporting the weight of the fan when in
operation. (Minimum 50Kg.).
10