Publicité
6
7
IMPORTANT! The Desk must be initialized before raising up and down for the fi rst time.
Follow 'Initialization Procedure' before raising or lowering the Desk.
Initialization Procedure:
STEP
OPERATION
1
Press and hold Λ & V simultaneously until legs stop
moving.
2
Release Λ & V together.
The initialization procedure must be completed before the fi rst running after the desk is installed or parts are replaced.
When a re-initialization procedure is needed, unplug the desk from the wall for 30 seconds before re-initializing,
Move Up and Down:
STEP
OPERATION
1
Press and hold Λ.
2
Release Λ.
3
Press and hold V.
4
Release V.
555-24-002-G-00 rev. B • 04/19
2 person lift.
MOTION
Legs move down at half speed of normal operation to the lowest postition and
rebound 2-5 mm, then stop.
Initialization is complete.
MOTION
Legs move up.
Legs stop.
Legs move down.
Legs stop.
5 of 12
Publicité
