Télécharger Imprimer la page

Power Fist 8866659 Mode D'emploi page 13

Publicité

Les langues disponibles

Les langues disponibles

V1.0
9 Gallon Twin-Tank Wheelbarrow Portable Air Compressor
7.
The compressor may only be operated in temperatures under 104°F and
over 32°F. In cold climates, the compressor should be installed in a
heated building.
8.
Fill the compressor pump with oil (see Lubrication).
9.
Fill the fuel tank with fuel.
10. Rust can form inside the crankcase and on internal components as a result
of condensation. A compressor must operate long enough during each run
cycle to reach full operating temperature in order to reduce the risk of
condensation.
11.
Condensation can also form in the air tank of your compressor. When this
happens, a mixture of air and moisture will be expelled through the
service valve and into whatever is connected to the valve (e.g. air hoses,
metal air lines, pneumatic tools, spray guns). An in-line filter, may be
required to eliminate the moisture.
12. Drive pulleys and compressor flywheels must be properly aligned and
tensioned to specifications.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
1.
Always use a clean cloth. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean the unit. Doing so
could risk deterioration of the enclosure plastic.
2.
Clean the intake filter every 100 hours in service. The intake filter
prevents dust and dirt from being drawn in and a clogged intake filter
will decrease performance. To clean the intake filter:
a.
Remove the two hex screw from the air intake filter (B) cover.
b.
Remove the filter from the two halves of the plastic housing, tap it
to remove the dirt, blast it down with low-pressure compressed
air (approx. 43 PSI) from inside of the filter to remove fine
particles and re-insert it.
MAINTENANCE SCHEDULE
WARNING! Some surface temperatures exceed 350°F when the unit is
operating. Do not touch as it may cause a burn injury. Wait for the unit to
cool before starting to service.
Visit www.princessauto.com for more information
8866659
13

Publicité

loading