EN
68
Manual configuration:
You can select DHPC (the IP address is assigned automatically) or enter the
IP address for the wireless network connection manually. If you select the
manual setting for a wired connection, the following information must be
entered:
•
SSID (name of the access point)
•
IP address
•
Subnet mask
•
Default gateway
•
Preferred DNS server
•
Alternate DNS server
If there is more than one network connection within the area, you can select
a specific network.
Check the network while the machine is on:
•
Enable/disable wireless network
•
When you activate the wireless network, the device automatically
searches for available networks. Select the desired wireless network.
•
Enter the WEP or WPA password to establish the wireless connection.
•
If there is no connection to the network or the connection could not be
established, the icon in the upper left corner is crossed out.
Date and time
•
The date and time settings can only be made if your device is connected
to a wireless network.
•
The device automatically sets the time and date once a network
connection is established and obtains its data from a central server.