Installation - Leb electronics ARGO230 Instructions Et Avertissements Pour L'installation Et L'usage

Preliminary checks
Before going on with the installation of the device check the following points:

Make sure the device works within employ limits, to be deduced from the
table of technical features.

Check the gate frame is solid and it runs without frictions nor other
obstacles.

Check there is a mechanical stop lock both in closing and opening.

Make sure the gate is well lined up to sliding guide.

The installation of the device should foresee a free space aimed to
operations for maintenance and manual releasing.
Fastening to the foundations plate

Before fixing foundations plate, prearrange one or more sheaths for the
passage of electric cables. The passage of cables must coincide with the
fitted hole obtained in the plate.

Place the fastening plate on the concrete base, respecting the dimensions
quoted in the following picture.

Make sure the foundations plate is perfectly parallel to the ground.

Fasten the device on the foundations plate, caring the anchor holes
coincide with the fitted slots.

INSTALLATION

9
ENGLISH