Publicité
Installation Procedures
To set the projector wall mount on the wall
1
Install the wall plate on the wall.
Use M6 × 55 self-tapping screws and dia.11 × 50 anchor bolts for the installation.
If installing the wall plate on the wall using securing 5 positions, drill the holes indicated
by A or B using Φ11 mm. (You can use the supplied wall plate template to determine the
position of the holes.) After drilling the holes, insert a 11 × 50 anchor bolt into each hole
and secure the wall plate with M6 × 55 self-tapping screws. Make sure the arrows on the
wall plate point upward, and it is kept level.
10
GB
Installation Procedures
23
450 (17
/
)
32
19
447 (17
/
)
32
19
218 (8
/
)
32
1
412.4 (16
/
)
4
Securing 5 positions
Center of
Wall plate
Unit: mm (inches)
Publicité
