Adjusting Floodlight Camera; Restoring Power; Using The Floodlight Camera On The Eufy Security App - eufy Security Floodlight Camera 2K Mode D'emploi

Mount Floodlight Camera On the Junction Box
1. Align the hole on the junction box with the opening in the Floodlight Camera.
2. Screw the central screw through the center of Floodlight Camera to mount
it in position.
3. Cover the central screw with the central screw cap to prevent it from rusting.

Adjusting Floodlight Camera

1. After installation is complete, loosen the adjustment screws on the
camera and floodlight to adjust the camera and light position to the
desired angles.
2. Tighten the screws firmly to complete the installation.
09 EN

Restoring Power

Switch on the main circuit breaker in the house. To confirm whether the
Floodlight Camera is operating, check the LED indicator. If it is flashing red,
it is ready for Eufy Security App setup.
If Floodlight Camera is not powered on, switch off the circuit
breaker before checking the wiring of Floodlight Camera.
Using the Floodlight Camera on the Eufy Security
App
1. Download the Eufy Security app from the App Store (iOS devices) or
Google Play (Android devices).
2. Sign up for a Eufy Security account. Follow the onscreen instructions to
connect Floodlight Camera to your Wi-Fi network. Now you can check live
stream in the Eufy Security App.
The Floodlight Camera can be used only after your phone and the
Floodlight Camera are connected to the same wireless network.
EN 10