Princess 212004 Mode D'emploi page 9

Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product for
many years.
Description (fig. A)
Your 212004 Princess blender has been designed
for the following applications: chopping and
mashing fruits and vegetables; preparing
smoothies, shakes and juices; preparing cold
soups; preparing dressings, dips and sauces.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
Before you proceed, we need you to pay
attention to the following notes:
- The appliance has been designed for mixing
cold and lukewarm ingredients (max. 55 °C).
It is recommended not to use the appliance
for mixing hot liquids and solids. Hot liquids
and solids can easily cause the jar to break
and the jar lid to abruptly come off the
appliance due to steam pressure. Keep the
jar lid pressed with your hand when mixing
lukewarm liquids to prevent leakage.
1. I/II button
2. 0/P button
3. Speed control button
4. Jar
5. Jar lid
6. Jar lid insert
7. Blade
Initial use
Preparation
• Clean the appliance. Refer to the section
"Cleaning and maintenance".
• Clean the accessories. Refer to the section
"Cleaning and maintenance".
Assembly (fig. B)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly or disassembly, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
• Mount the jar (4) onto the appliance.
Lock the jar (4) by turning it clockwise until
it clicks into place.
• Mount the jar lid (5) onto the jar (4).
• Mount the jar lid insert (6) into the jar lid (5).
Use
Switching on and off (fig. A & B)
Before you proceed, we need you to pay
attention to the following notes:
- Do not switch on the appliance when the
jar is empty.
- Do not leave the appliance switched on
continuously for more than three minutes.
• To switch on the appliance with continuous
low speed, make sure that the I/II button
(1) is pressed.
• To switch on the appliance with continuous
high speed, make sure that the I/II button
(1) is not pressed.
• To switch on the appliance in pulse mode,
keep the 0/P button (2) pressed. Do not
press the I/II button (1) or any of the speed
control buttons (3).
• To switch off the appliance, release the
0/P button (2).
Setting the speed (fig. A)
• Set the speed control button (3) to the
required position. Refer to the table below
to set the correct speed.
Speed
1/2
3/4
5/6
7/8
9/10
9
Application
Beating
Mashing
Crumbling
Chopping / Grating
Mixing