Nibe SMS 40 Manuel Installateur page 12

GB
F1345
Terminal block X1 on the SMS card (AA9) in SMS 40 is
connected to terminal block X6:4-7 on terminal block
(X6) in the heat pump.
Use cable type LiYY, EKKX or similar.
F1345
Settings
Caution
Take care when inserting the SIM card.
1. Insert the SIM card in SMS 40 by carefully sliding the
holder to one side and folding it up. Then slide the
SIM card into the cover.
12
4 5 6 7
F1345
Externt
GND B A 12V
2. If you want SMS 40 to send SMSs in the event of a
power cut, carry out the following:
Install a 9V battery on the circuit board in SMS
40.
Position the jumper according to the image be-
low.
Caution
The pin code must be deactivated and if it is pay
as you go there must be credits on the card.