EINHELL GE-CM 36/48 Li M Instructions D'origine page 20

•
Safety plug
•
Cable clips (1x)
•
Fastening screws for top push bar (4x)
•
Side ejector
•
Original operating instructions
•
Safety instructions
3. Proper use
The lawn mower is intended for private use, i.e.
for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of
50 hours, during which time the equipment is
primarily used to maintain small-scale, residential
lawns and home/hobby gardens. Public facilities,
sporting halls, and agricultural/forestry applica-
tions are excluded.
Caution! Due to the high risk of bodily injury to
the user, the lawn mower may not be used to trim
bushes, hedges or shrubs, to cut scaling vege-
tation, planted roofs, or balcony-grown grass, to
clean (suck up) dirt and debris off walkways, or
to chop up tree or hedge clippings. Moreover, the
lawn mower may not be used as a power cultiva-
tor to level out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind, unless they have been expressly per-
mitted by the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Motor speed: .......................................3200 min
Protection class: ................................................III
Weight: ........................................................17 kg
Cutting width: .............................................48 cm
Anl_GE_CM_36_48_Li_M-Solo_SPK13.indb 20 Anl_GE_CM_36_48_Li_M-Solo_SPK13.indb 20
GB
Sound pressure level L
Uncertainty K : ....................................... 3 dB(A)
pA
Sound power level L
WA
Uncertainty K : ................................... 1.8 dB(A)
WA
Guaranteed sound power level L
Vibration at the handlebars a
Uncertainty K: ......................................... 1.5 m/s
Cutting height adjustment: ........................ 6-step
............................................................ 30-75 mm
Protection type: ........................................... IPX1
Caution!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power-X-
Change series!
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
Sound and vibration values were measured in ac-
cordance with the standards EN ISO 3744:1995,
ISO 11094:1991, EN ISO 11201:1995 and EN
ISO 20643:2005.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The fol-
lowing hazards may arise in connection with
the equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is applied.
-1
- 20 -
: ...................... 81 dB(A)
pA
: .......................... 92 dB(A)
: ....... 94 dB(A)
WA
: ............. 0.73 m/s
2
h
2
10.03.2022 11:41:25 10.03.2022 11:41:25