X02137A00 - Ed. 1 - 12/01
6.
GENERAL SPECIFICATIONS
Adjustment
This multimeter incorporates a non-volatile memory containing the adjustment charac-
teristics for all measurement ranges. It is supplied with a certificate of conformity.
Intrinsic Safety
acc. to
Designation
The battery must be replaced outside danger zone only.
Casing
Labels
PCB's IRC
Protecting varnish IRC (2 layers)
Environment
Indoor use
Altitude
Reference temperature
Rated range of use
Max. temperature of use
in danger zone
Limit range of operation
Storage temperature range
Temperature coefficient
Relative humidity
Operating quality
Max. influence in electromagnetic fields
at 3 V/m acc. to EN 61000-4-3, 1997
EMC
This unit was designed in compliance with the EMC standards in force and its
compatibility has been tested in accordance with the following standard.
Emission and Immunity acc. to NF EN 61326-1, 1998.
Sealing
IP 67
Resistance
Fall resistance
Impact resistance
Heat resistance
Power supply
9 V alcaline battery (6LF22, 6LR61)
This multimeter must be fitted with certified batteries, such as
ENERGIZER
ENERGIZER
DURACELL
DURACELL ULTRA
42
NF EN 50014, EN 50014 : 1992
NF EN 50020, EN 50020 : 1994
LCIE 02.E6001X EEx ib II C T6
LCIE 02.E8001X EEx ib I
FR90 Bayblend, YE 3216 (yellow)
sticking polycarbonat, 8A85 quality
> 100
> 100
< 2000 m
18°C to 28°C
0°C to 50°C
≤ 40°C
-10°C to 60°C
-40°C to 70°C
max 0.1 x accuracy /°K
0 to 80% from 0°C to 40°C (70% max. for 5 MΩ/50 MΩ),
0 to 70% from 40°C to 50°C,
60% above 50°C
IEC 359
± 100 D for the V
AC+DC
acc. to NF EN 60 529 : 1992
acc. to EN 50014 (1999)
acc. to EN 50014 (1999)
acc. to EN 50014 (1999)
battery life 100 hours in V
6LF22,
6AM6
6LR61,
6AM6
6LR61,
MN1604
6LR61,
MN 1604
Intrincally safe portable digital multimeter
, V
, I
capacitance ranges
DC
DC,
mode
DC
Chapter II