Set Alarm Point; Set Auto Power Off Time - SEFRAM SE-513 Manuel D'utilisation

(12) Press
(13) Press the
(14) Press
(15) Press the
(16) Press
Note:
Set altitude compensation range: 0 ~ 3000m
The factory default setting is at zero.
Please check and set the correct value before measuring.

7.3.4 Set alarm point:

Want to set window. (see Fig.9 or Fig.10)
(3) Press the
(4) When setting on mode, press the
(CO alarm setting see Fig.11 and Fig.12)
2
Fig.9
Note:
Fig.15
When the measuring values go beyond alarm point, the symbol will blink "
" " on the LCD.
The beeper will make " beep-beep-beep " sound.
The Lo alarm set cannot be greater than Hi alarm set.

7.3.5 Set auto power off time:

Press the /
hours, or off.
(See Fig.13 or Fig.14)
Note:
The Auto-power off function will automatically
the button.
/ button to increase / decrease 3rd digit value (0-9).
the button.
/ button to increase / decrease 4th digit value (0-3).
the button to set altitude compensation.
/ button to turn ON or OFF.
Fig.10
Fig.16
button to select auto power off option 10, 30 minutes, 1, 2, 4, 8
9
Mesureur de Dioxyde de Carbone (CO
button to set Hi and Lo limit.
Fig.11
Fig.13
Fig.12
" or
Fig.14
)
2