Orbegozo CP 88105 Manuel D'instructions page 12

CP 88105
This remote controller has 16 different code combinations. The code on the emitter and the receptor must be
the same in order to ensure the remote controller to work properly.
TRANSMITTER OPERATION:
Point the remote at the infrared sensor to power the fan.
HI:
MED: turn on the fan at medium speed.
LOW: turn on the fan at low speed.
OFF:
CENTRAL: changes the fan rotation (the unit should be running).
LIGHT: turn on / off the light or controls its intensity.
Do not use other wall controller or any other device with dimmer, since it could
damage your remote control.
Important: With dimmer function on, use only suitable bulbs for their light regulation.
turn on the fan at high speed.
turn off the fan.
12