Belkin OmniView SE Plus Serie Guide D'installation Rapide page 7

P74183ea_F1DZ102-104_QIG.qxd
3
1. Using an OmniView KVM Cable*, connect the male end of the VGA cable to
the VGA port on the first computer. Connect the female end to the VGA
port on the back of the Switch for CPU1.
VGA
2. Connect one end of the PS/2 keyboard KVM cable* to the keyboard port
on the computer and the other end to the CPU1 keyboard port
on the back of the Switch.
3. Connect one end of the PS/2 mouse KVM cable* to the mouse port
on the computer and the other end to the CPU1 mouse port on the back
of the Switch.
Repeat steps 1 through 3 for each additional computer to be connected to the
Switch, connecting them to the corresponding CPU ports on the back.
*Please refer to the first page for part numbers.
16-04-2003
Connecting Computers to the Switch
(Video and PS/2 Connection)
VGA 04 VGA 03 VGA 02
USB 04 VGA 01
USB 02
04 USB 03 03 USB 01
02 01
10:02 Page 5