HBM ME50S6 Mode D'emploi page 7

7
ME50S6
For more detailed information on disposal, please contact the local authorities
or the dealer from whom you purchased the product.
IMPORTANT
Important information
Indicates important information about the product or about handling the pro-
duct.
TIP
Information / Instructions for use
Instructions for use or other valuable information for the user.
Reconstruction and modifications
HBM's express consent is required for modifications regarding the ME10
construction and safety. HBM does not take responsibility for damage result-
ing from unauthorized modifications.
In particular, repair and soldering works on the boards are prohibited. If com-
plete componentry is replaced use original HBM components, only.
Qualified personnel
The device may be used by qualified personnel, only; the technical data and
the special safety regulations must in any case be observed. When using the
device, the legal and safety regulations for the respective application must
also be observed. The same applies if accessories are used.
Qualified personnel means: personnel familiar with the installation, mounting,
start-up and operation of the product, and trained according to their job.
Maintenance and repair work on an open device with the power on should
only be undertaken by trained personnel who are aware of the above-men-
tioned dangers.
A0260−3.0 en/de/fr
HBM